Materialload Material quantity reference

Cinder block calculator

Enter the wall length and height. The result comes back in whole blocks, with a cut allowance, plus the mortar it will take to lay them.

Cinder block calculator live
ft
ft
%

An 8 × 8 × 16 block with a 3/8 in joint faces 0.888 sq ft, which is why the trade rule is 1.125 blocks per sq ft.

sq ft
$
You need
— blocks
—
Area —
With waste —
Waste —
Per block —
Material cost $—
Check concrete block prices

Affiliate link. The cost above is units × the price you entered — it is not a quote.

An 8 ft × 10 ft wall is 80 sq ft, which takes 90 block faces at 0.888 sq ft each — 95 blocks once a 5% allowance for cuts and corners is included.

What the calculator assumes

  • A nominal 8 × 8 × 16 block covers 0.888 sq ft with a 3/8 inch joint. Nominal means the block measures 7⅝ × 7⅝ × 15⅝ and the joint makes up the difference.
  • One block face per block. The calculator counts faces, so a wall that is 8 inches thick and one that is 12 inches thick need the same number per sq ft, but different blocks to buy.
  • Waste defaults to 5%, which covers corner cuts, bond beam courses and the block you break.
  • No deduction for openings. Doors and windows are subtracted by you, because whether they get blocks depends on the lintel design.

Block coverage by size

Block Nominal face Coverage Blocks per 100 sq ft
8 × 8 × 16 8 × 16 in 0.888 sq ft 113
8 × 4 × 16 4 × 16 in 0.444 sq ft 225
8 × 8 × 8 8 × 8 in 0.444 sq ft 225
6 × 8 × 16 8 × 16 in 0.888 sq ft 113
12 × 8 × 16 8 × 16 in 0.888 sq ft 113

Width does not change the count — it changes the price and the weight. A 12 inch block weighs about 55 lb against 38 lb for an 8 inch, which is the number that decides whether you can lay them alone.

What else the wall needs

A block wall is not just blocks:

  • Mortar: one 80 lb bag per 35 blocks, or 31 sq ft of wall.
  • Rebar or bond beam: horizontal every 4 ft on a tall wall, vertical in every fourth core.
  • Grout: poured into the cores at corners and around openings.
  • Footing: a block wall needs one, and it is a separate concrete calculation.

Where the number goes wrong

Measuring to the top of the wall, not the top of the last course. Block walls go up in 8 inch courses, so a wall specified at 7 ft 6 in ends at 7 ft 4 in or 8 ft — the course height wins. Round up to the nearest 8 inches.

Forgetting the bond beam. A wall over 4 ft usually finishes with a filled bond beam course, which is blocks plus grout plus rebar, not just blocks.

Buying exactly the count. Block yards sell by the pallet of 75 or 90 and will not break one. Order the pallet; the spare blocks become the fire pit base.

FAQ

Concrete block questions

How many cinder blocks per square foot?

1.125 blocks per sq ft for a standard 8 × 8 × 16 block with a 3/8 inch joint. Equivalently each block covers 0.888 sq ft. A 100 sq ft wall is 113 blocks before any waste.

How many bags of mortar for 100 blocks?

About three 80 lb bags of Type S for a standard 8 inch wall, roughly one bag per 35 blocks. That is 31 sq ft of wall per bag, which is what this calculator uses.

Are cinder blocks and concrete blocks the same thing?

In practice, yes — the trade uses the names interchangeably. True cinder blocks used coal cinders and are no longer made. What you buy today is a concrete masonry unit, and it is sold as 8 × 8 × 16 inches nominal.

Do I need to add for corners and openings?

The 5% waste covers corners and cuts. Openings are the bigger number: a door is 21 sq ft and a window 15, so subtract them before calculating unless you are buying for the full wall anyway.

REL

Related calculators