Materialload Material quantity reference

Material quantities, done properly

Know exactly how much material to buy.

Enter a length, a width and a depth. Get cubic yards, tons and bags — and the formula that produced them, so you can check the arithmetic before you call the yard.

27 Live calculators
3 Calculation engines
0 Sign-ups required
Quick estimate live
ft
ft
in
%
You need
— cu yd
—
Weight —
Bags —
Area —
Depth —
Open full calculator
01

What you can calculate

Full index →
02

The number is the easy part

Step 01

Area × depth

Length times width gives square feet. Multiply by depth expressed in feet — 3 inches is 0.25 ft — and you have cubic feet.

Step 02

Cubic feet ÷ 27

A cubic yard is 3 × 3 × 3. This is the unit almost every yard sells bulk material in, and the one most people get wrong by a factor of three.

Step 03

Cubic feet × density ÷ 2,000

Density is what turns a volume into a weight, and it varies more than people expect: gravel is 100 lb per cubic foot, mulch is 30.

Worked example — 20 ft × 10 ft driveway, 3 in of gravel, 10% waste
Quantity Working Result
Area 20 × 10 200 ft²
Volume 200 × 0.25 × 1.10 55 cu ft
Volume 55 ÷ 27 2.04 cu yd
Weight 55 × 100 ÷ 2,000 2.75 tons

Full method, sources and limitations →

03

Why you can check our numbers

Every formula is on the page

Not summarised, not hidden behind a tooltip. If a page says 2.75 tons, the working that produced it sits directly above.

Densities are stated, not assumed

Each material carries a density in pounds per cubic foot. Change the assumption and you change the answer — so we show you which assumption we used.

Reviewed, with a date

Pages carry the date they were last checked against supplier pricing and reference densities, plus an editorial policy covering how corrections are handled.

04

Material densities

Bulk densities used by every calculator on this site. US customary units.
Material Density (lb/ft³) Weight per cubic yard 50 lb bags per yd³
Gravel 100 2,700 lb (1.35 t) 54
Crushed stone 100 2,700 lb (1.35 t) 54
Pea gravel 100 2,700 lb (1.35 t) 54
Sand 100 2,700 lb (1.35 t) 54
Landscape rock 100 2,700 lb (1.35 t) 54
Topsoil 81 2,187 lb (1.09 t) 54
Fill dirt 105 2,835 lb (1.42 t) 54
Mulch 30 810 lb (0.41 t) 54
Compost 37 999 lb (0.50 t) 54
Concrete mix 150 4,050 lb (2.02 t) 54

Figures are mid-range values for dry, loose material. Wet sand, damp topsoil and mixed aggregate all run heavier — a yard of wet sand can exceed 1.5 tons. Always confirm with the supplier when the load is being weighed rather than measured.

FAQ

Questions people ask before ordering

How do I work out how much material I need?

Multiply length by width to get the area, multiply that by the depth in feet to get cubic feet, then divide by 27 to get cubic yards. Suppliers selling by weight need one more step: multiply cubic feet by the material density in pounds per cubic foot, then divide by 2,000 for tons.

Why do suppliers quote some materials by the ton and others by the yard?

Loose stone and sand are heavy enough that weight is the honest measure — a yard of gravel is about 1.35 tons, so a truck is limited by weight before volume. Mulch is the opposite: a yard weighs only about 0.4 tons, so it is always sold by volume. That is why the same delivery can be quoted two different ways.

How much extra should I order?

Ten percent on flat, firm ground. Fifteen percent on slopes, on soft subgrade, or when the material will be compacted. Under-ordering costs far more than over-ordering, because a second delivery usually carries a minimum charge or a full trip fee.

Are these calculators free to use?

Yes, with no account and no email. The site is funded by affiliate commissions on retailer links, which is why you will see a disclosure next to them. The calculation itself never depends on which retailer you use.

Pick a material and get a number.

27 calculators across five trades, from aggregate to deck stain. All of them run in the browser, with the working printed underneath.

Browse the index