Materialload Material quantity reference

Gravel calculator

Enter the area you are covering and the depth you want. The result comes back in cubic yards, tons and bags — plus what it costs at the price you are quoted.

Gravel calculator live
ft
ft
in
%

Driveways usually get 4 in; walkways 2–3 in.

$
You need
— cu yd
—
Weight —
Bags —
Area —
Depth —
$
Material cost $—
Check gravel prices

Affiliate link. The price above is calculated from the unit price you entered — it is not a quote.

For a 20 ft × 10 ft driveway at 3 inches deep you need about 2.04 cubic yards of gravel, or 2.75 tons, which is 55 cubic feet once a 10% waste allowance is included. Gravel runs about 100 lb per cubic foot, so one cubic yard weighs roughly 1.35 tons.

What the calculator assumes

The engine converts everything to cubic feet first, so you can mix feet, inches, metres and centimetres in the same session without thinking about it.

  • Area is length × width for a rectangle, or πr² for a circle.
  • Depth is converted to feet before multiplying — 3 in becomes 0.25 ft.
  • Waste is applied before the volume is converted, so the yardage and the tonnage you see already include it.
  • Weight uses a density of 100 lb per cubic foot, the mid-range value for dry pea gravel and crushed stone.

If your supplier quotes a different density, change the price and waste fields rather than second-guessing the volume — the volume is the part that does not move.

Choosing a depth

Application Depth Notes
Decorative bed 2 in Enough to hide soil; not enough to walk on daily
Garden path 2–3 in Use angular stone, not rounded pea gravel
Shed base 4 in Over landscape fabric, compacted in two passes
Residential driveway 4 in Plus 4–6 in of compacted base stone underneath
Drainage trench 6–12 in Graded stone, wrapped in filter fabric

Depth is the field people get wrong most often, because it is the only one where the correct answer depends on what is underneath. Loose or wet subgrade swallows the first inch or two, so the finished surface ends up shallower than planned.

Bulk delivery versus bags

A cubic yard of bulk gravel is roughly 1.35 tons. The same volume in 50 lb bags is 54 bags. At typical 2026 US pricing that is around $45–65 for the bulk yard against $270–330 for the bags — so the break-even is not close.

Bags earn their place in three situations: you need less than a yard, the delivery minimum is more than the material, or the site has no access for a truck. Otherwise order bulk and accept the delivery fee.

Where the number goes wrong

Compaction. Gravel compacts by roughly 10–20% under a plate or roller. The material you need does not shrink, but the finished depth does. If you are matching a grade line, add the compaction allowance to your target depth rather than subtracting it from the order.

Uneven ground. A driveway that slopes 6 inches across its width needs more stone at the low side. Measure the deepest point, not the average, or split the area into strips and calculate each.

Migration. Rounded pea gravel on soft ground disappears into the subgrade within a season. Angular crushed stone locks together and stays put. The calculator cannot tell you which you bought — that is on the ticket.

Moisture. Damp gravel weighs more for the same volume. If the load is being sold by weight and it rained the day before, expect to pay more for the same yardage.

FAQ

Gravel questions

How many tons of gravel are in a cubic yard?

About 1.35 tons. Gravel and crushed stone sit close to 100 lb per cubic foot, and a cubic yard holds 27 cubic feet, so 2,700 lb ÷ 2,000 = 1.35 tons. Damp material and mixed aggregate can push that to 1.4–1.5 tons, which is why weighed loads often come in heavier than the volume suggests.

How deep should gravel be for a driveway?

Four inches of surface gravel over a compacted base is the usual minimum for a residential drive. Two to three inches is enough for walkways, shed bases and decorative beds. Below two inches the stone will migrate into the subgrade and you will be topping it up within a season.

How many bags of gravel make a cubic yard?

Fifty-four 50 lb bags, because each covers about 0.5 cubic feet and a cubic yard is 27 cubic feet. Bagged gravel typically costs three to five times as much per cubic yard as bulk delivery, so bags make sense for patching and small beds, not for a driveway.

Is it cheaper to order gravel by the ton or by the yard?

By the yard if the supplier quotes both at a fair rate, because volume is what you actually need and weight varies with moisture. Order by the ton only when the yard weighs the load — then the tonnage on the ticket is the honest number and the volume figure is an estimate.

How much does a yard of gravel weigh when wet?

A yard of saturated gravel can reach 1.5 tons or more, against roughly 1.35 tons dry. The difference is water sitting in the voids, not extra stone. If you are ordering by weight after heavy rain, expect the same volume to cost more.

REL

Related calculators