Materialload Material quantity reference

Landscape rock calculator

Decorative rock is sold by the yard, the ton and the bag. Enter the bed size and depth to get all three, plus what it costs at your supplier's price.

Landscape rock calculator live
ft
ft
in
%

Decorative rock hides weed fabric at 2 in; 3 in reads as solid cover.

$
You need
— cu yd
—
Weight —
Bags —
Area —
Depth —
$
Material cost $—
Check landscape rock prices

Affiliate link. The price above is calculated from the unit price you entered — it is not a quote.

A 10 × 4 ft bed at 2 inches deep needs 6.7 cubic feet of landscape rock, or 7.3 cubic feet with a 10% waste allowance — about 0.27 cubic yards, which weighs roughly 0.37 tons.

What the calculator assumes

  • Density 100 lb per cubic foot for river rock and most decorative stone. Porous lava rock is much lighter at 45–55 lb/ft³, so change the field if that is what you bought.
  • Depth is the rock layer only. If the bed needs to be raised to meet a path, the fill underneath is a separate calculation.
  • Waste defaults to 10%, which covers the edges where depth always tapers and the bag you open to top up.
  • Area excludes the plants. Measure the bed, then estimate the planted area and subtract it — for a mature bed that can be 30% of the total.

Coverage by rock size

Rock size Depth Coverage per ton
3/8 in pea 2 in 110 sq ft
1–2 in river rock 2 in 105 sq ft
2–4 in river rock 3 in 70 sq ft
4–8 in cobble 4 in 40 sq ft
Lava rock (light) 3 in 130 sq ft

Bigger rock needs more depth to look right, and the surface is never level — a 4–8 in cobble bed that measures 4 inches is 6 inches in places. That variance is why the waste figure matters more here than on a flat material.

How rock is priced

Most yards quote by the ton, some by the cubic yard, and the bag price is 4–6× the bulk rate. At 100 lb per cubic foot a cubic yard is 1.35 tons, so a $78/ton price is about $105/yard — worth checking which one the quote used.

Delivery is usually the deciding factor on small jobs: a 0.27 cubic yard bed is twelve 0.5 cu ft bags, which fits in a car boot and costs about the same as the yard’s minimum delivery charge.

Where the number goes wrong

Measuring a curved bed. Approximate with rectangles and add them, then add 10%. A freehand curve always measures longer than it looks.

Forgetting the plants. A 200 sq ft bed with mature shrubs may only take rock on 140 sq ft. Order for the rock area, not the bed area.

Ignoring the edging depth. Rock sits higher than mulch because it does not compact. If the bed meets a lawn, the rock edge needs a hard border or it will spill into the grass within a season.

FAQ

Landscape rock questions

How many square feet does a ton of landscape rock cover?

About 110 sq ft at 2 inches deep, or 73 sq ft at 3 inches. A ton is roughly 0.74 cubic yards at 100 lb per cubic foot, so deeper beds cover proportionally less area.

How deep should decorative rock be?

Two inches minimum to hide the soil and the fabric, three inches if you want it to read as a solid surface from standing height. Below two inches the soil colour shows through and weeds find the gaps.

Is river rock cheaper than mulch?

Not up front — roughly three to four times the cost per cubic yard — but it does not decay, does not need replacing every year and does not blow away. Over five years the numbers cross.

Do I need landscape fabric under rock?

Yes, and it matters more than with mulch. Rock is heavy, so a puncture in the fabric stays open; and rock is permanent, so a weed problem under it is permanent too. Use a woven fabric, not the thin perforated film.

REL

Related calculators