Paint calculator
Enter the wall length and height, pick how many coats, and the result comes back in gallons — plus what it costs at the price you are quoted.
350 sq ft per gallon is the label figure for a flat interior paint. Eggshell and semi-gloss spray thinner coats.
Affiliate link. The cost above is units × the price you entered — it is not a quote.
A 12 × 10 ft room with an 8 ft ceiling has about 352 sq ft of wall. Subtract roughly 70 sq ft for two doors and two windows and you are coating 280 sq ft; two coats is 560 sq ft, which is 1.7 gallons at 350 sq ft per gallon — so buy 2 gallons.
What the calculator assumes
- Wall area is length × height. For a whole room, add the four wall lengths together and enter that as one length — or run each wall separately and add the gallons.
- Openings are not deducted automatically. A standard door is 21 sq ft and a standard window 15 sq ft. Subtract them yourself if you are painting a full room; leave them in if you are painting a single wall around furniture.
- Coats multiply the area, not the coverage. Two coats of the same paint is the same as doubling the wall area. That is why the result moves in whole gallons as soon as you go from one coat to two.
- Waste is applied before rounding. An 8% default covers roller loss, the cut-in line and the last inch in the can.
Coverage is a range, not a number
The 350 sq ft figure on the label is a laboratory number for a smooth, sealed surface. Real walls are not that.
| Surface | Realistic coverage | Why |
|---|---|---|
| Previously painted, smooth | 350–400 sq ft/gal | The wall is already sealed |
| Bare or new drywall | 250–300 sq ft/gal | Paper and joint compound pull paint in |
| Fresh skim coat or patch | 200–250 sq ft/gal | Patch compound is far more absorbent than the board |
| Light texture (orange peel) | 250–300 sq ft/gal | More surface area per square foot of wall |
| Heavy texture or brick | 150–200 sq ft/gal | Real surface area can be double the flat measurement |
| Sprayed, same colour | 400+ sq ft/gal | Less is lost to the roller |
If you are painting bare drywall, run the calculation at 275 sq ft per gallon and skip the primer debate — the two numbers converge.
Gallons for a typical room
Both coats, 8 ft ceiling, one door and one window deducted:
| Room | Wall area | Gallons (2 coats) |
|---|---|---|
| 10 × 10 | 250 sq ft | 2 |
| 12 × 12 | 314 sq ft | 2 |
| 12 × 15 | 362 sq ft | 3 |
| 15 × 20 | 490 sq ft | 3 |
| 20 × 20 | 570 sq ft | 4 |
The jump from 2 to 3 gallons happens around 350 sq ft of wall, which is why a 12 × 12 room and a 12 × 15 room often cost the same at the till and a 15 × 20 room does not.
Where the number goes wrong
Colour change. Going from a dark wall to white, or the reverse, needs a tinted primer plus two topcoats. That is three passes over the same wall, and the calculator will only count what you tell it to.
Paint-and-primer in one. These products market themselves on one-coat coverage. They cover the colour, not the patch — visible repairs still need a spot prime, and spot priming is cheaper than a third coat of $40 paint.
Sprayers. A sprayer wastes 20–30% to overspray unless you are back-rolling. If you are spraying, raise the waste field to 25% rather than trusting the label.
The fifth wall. Ceilings are usually a different, flatter paint. Buying one gallon of ceiling white for a 120 sq ft ceiling is right; buying it in the wall colour is a mistake you only make once.
Paint questions
How much paint do I need for a 12 × 12 room?
About 2 gallons for two coats. A 12 × 12 room with an 8 ft ceiling has 384 sq ft of wall; take off roughly 70 sq ft for a door and a window, double it for two coats, and divide by 350 sq ft per gallon. That is 1.8 gallons, which rounds up to 2.
Does a gallon really cover 350 sq ft?
Only on a smooth, primed, previously painted wall in a similar colour, applied with a roller. Bare drywall absorbs more, so plan on 250–300 sq ft. Textured or porous surfaces can drop to 200 sq ft per gallon.
Should I use one coat or two?
Two, whenever the colour is changing or the surface is patched. One coat is only realistic when you are refreshing the same colour on a sound wall. A one-coat colour change usually shows through within a year.
Do I count the ceiling in the same calculation?
Only if you are painting it. The ceiling is a separate area — length × width, not wall length × height — and it takes its own coats. Add it as a second calculation rather than folding it into the wall figure.
How many square feet does a quart cover?
About 87 sq ft at 350 sq ft per gallon. Quarts exist for touch-ups and single doors, not for walls; two quarts cost more than a gallon at almost every retailer.