Deck board calculator
Decking is sold in 8, 12 and 16 ft lengths, and the board count depends on which you buy. Enter the deck area and get the board count for 8 ft boards.
A 5/4 × 6 board is 5.5 in wide, so an 8 ft board faces 3.67 sq ft. Decking is sold by the linear foot too — 3.67 sq ft = 8 ft.
Affiliate link. The cost above is units × the price you entered — it is not a quote.
A 12 × 16 ft deck is 192 sq ft. With a 10% allowance for end cuts that is 212 sq ft, which is 58 boards of 5/4 × 6 × 8 ft decking at 3.67 sq ft of face each.
What the calculator assumes
- A 5/4 × 6 board covers 3.67 sq ft over 8 ft, once a 1/8 inch gap is allowed. Change the coverage field for 2 × 6 (5.5 in face, same) or 1 × 6 (5.5 in face, thinner).
- Boards run one way. A deck with a picture-frame border, diagonal layout or herringbone needs 15–20% more.
- Waste defaults to 10%. Running boards the short way across a 16 ft deck wastes more than 10% — offcuts under 2 ft are unusable.
- No allowance for stairs or railings. Stairs are separate boards; railings are linear feet of rail and balusters.
Board count by deck size
Boards of 8 ft, 10% waste, joists at 16 in:
| Deck | Area | 8 ft boards | 12 ft boards |
|---|---|---|---|
| 10 × 12 | 120 sq ft | 36 | 24 |
| 12 × 12 | 144 sq ft | 44 | 29 |
| 12 × 16 | 192 sq ft | 58 | 39 |
| 16 × 20 | 320 sq ft | 96 | 64 |
Longer boards win on more than price: two 12 ft boards instead of three 8 ft boards removes one end joint from the middle of the deck, and end joints are where water sits.
What goes with the decking
Per 100 sq ft of deck surface:
- Hidden fasteners: 100 clips, or 2 per joist per board.
- Face screws: 2.5 per sq ft, so 250 per 100 sq ft.
- Joist tape: the linear feet of joist, top face only. Cheap, and it doubles joist life.
- End gap: 1/8–3/16 inch between board ends, and 1/4 inch at the rim.
Where the number goes wrong
Forgetting the border. A picture-frame border is a design decision that adds a full row of boards around the perimeter plus mitre cuts — about 12% on a 12 × 16 deck.
Measuring the framing, not the surface. Decking overhangs the rim by 1 inch on most builds. Measure the finished surface.
Buying composite by the board count. Composite decking is often priced by the linear foot and sold in 12, 16 and 20 ft lengths. Convert: 3.67 sq ft of 5/4 × 6 equals 8 linear feet.
Deck boards questions
How many deck boards do I need for a 12 × 16 deck?
About 58 boards of 8 ft length at a 10% allowance, or 39 boards if you buy 12 ft lengths and run them the long way. Longer boards mean fewer joints and less waste, which is why the count drops.
How wide is a 5/4 × 6 deck board?
5.5 inches of face. The 6 is nominal. With a 1/8 inch gap the effective coverage is 5⅝ inches, which is why an 8 ft board covers about 3.67 sq ft rather than 4.
How many screws per board?
Two per joist, so four per 8 ft board at 16 inch joist spacing. That is 2.5 screws per square foot, or about 480 for the deck above — buy the 5 lb box.
Should decking run parallel to the house?
Parallel to the house is the default because the joists run perpendicular to it and the boards land across them. Boards running the other way need blocking, or a second layer of framing.