Materialload Material quantity reference

Drywall calculator

Enter the wall run and the ceiling height. Sheets come back with cuts included — and the joint compound follows the same area.

Drywall calculator live
ft
ft
%
sq ft

A 4 × 8 ft sheet is 32 sq ft; 4 × 12 ft is 48. Change the coverage field when you buy the longer board.

sq ft
$
You need
— sheets
—
Area —
With waste —
Waste —
Per sheet —
Material cost $—
Check drywall prices

Affiliate link. The cost above is units × the price you entered — it is not a quote.

A 12 × 10 ft room with an 8 ft ceiling has 352 sq ft of wall. Deduct two doors and two windows and you are hanging 282 sq ft, which is 10 sheets of 4 × 8 drywall with a 10% cut allowance.

What the calculator assumes

  • Sheets are 4 × 8 ft, which is 32 sq ft. Use the coverage field for 4 × 12 (48 sq ft) or 4 × 10 (40 sq ft) board.
  • Openings are deducted from the run, not from the sheet count. A 30 inch door is 21 sq ft; a 3 × 5 ft window is 15 sq ft.
  • Waste defaults to 10%, which is realistic for a room with four corners. A single flat wall needs 5%; a room full of closets needs 15%.
  • Walls only, not the ceiling. Measure the ceiling separately if you are boarding it — it is a different sheet and often a different thickness.

Sheets per room

Room Wall area Sheets (walls) Ceiling sheets
10 × 10 250 sq ft 9 4
12 × 12 314 sq ft 11 5
12 × 15 362 sq ft 13 7
15 × 20 490 sq ft 17 11

The ceiling is not a rounding error. Boarding a 12 × 15 ceiling is six more sheets and, more importantly, six sheets of overhead work — which is where the time goes.

What goes with the board

Per 100 sq ft of drywall, budget:

  • Joint compound: 1 gallon ready-mix for level 3, 2 for level 4, 3 for a level 5 skim.
  • Joint tape: 1 roll (500 ft) covers about 400 sq ft of board.
  • Screws: 100 per 100 sq ft, so roughly 32 per sheet.
  • Corner bead: the linear feet of outside corners, plus 10%.

Buying the board without the compound is the classic first-timer’s second trip.

Where the number goes wrong

Not deducting openings and then adding 10%. Doing both is fine; doing neither leaves you short by three sheets and a trip.

Forgetting the ceiling height. Nine foot ceilings add 12% to the wall area against eight foot, and older houses are full of them.

Ordering 8 ft sheets for a 9 ft wall. You will be seaming horizontally at 8 ft, which is a visible joint in the wrong place. Order 12 ft board for tall walls and cut it down.

FAQ

Drywall questions

How many sheets of drywall for a 12 × 12 room?

About 11 sheets for the walls with an 8 ft ceiling, plus 5 for the ceiling. Walls are 384 sq ft less 70 for openings, which is 314 sq ft before the 10% allowance, and a sheet is 32 sq ft.

How much joint compound do I need?

Roughly one gallon of ready-mix per 100 sq ft of board for a level 3 finish, with a 5 gallon bucket covering a small room. Level 5 skim coating roughly doubles it.

Should I use 1/2 inch or 5/8 inch drywall?

1/2 inch on walls and ceilings with joists at 16 inches; 5/8 inch for ceilings at 24 inch spacing, for fire-rated walls, and anywhere you want more sound isolation. 5/8 sagging less is why it is specified on ceilings.

How many screws per sheet?

About 32 — screws every 12 inches on studs at 16 inch centres, around the perimeter and up the middle. Use 1⅝ inch screws for 1/2 inch board on wood studs.

REL

Related calculators